Kingston Technology KNS2450/R Manuel D’Utilisation

Kingston Technology Company

KNS3250/R User’s Guide - Rev. A00

10

Kingston Switch Configuration Utility

Use  this  button  to  save  the  current  conguration  data  to  the  device.  After  a 

successful write operation, the device automatically resets and initializes the new 

conguration. 

If the write operation fails, check the following:
  •  Verify the conguration cable is well connected.
  •  Ensure  that  the  conguration  cable  is  connected  directly  from  the  PC  to 

    the Switch. If any other devices are connected to the PC’s printer port, please 

    disconnect them before attempting the conguration of the switch.
  •  Check the host PC to verify that the drivers for the Printer Port (LPT1) are 

    installed correctly. 
  •  Make  sure  the  I/O  address  selected  in  the  Printer  Port  I/O  Address  eld 

    matches the actual setting on the host PC.

Use this button to read the conguration data from the device. If the operation is 

successful, the current conguration will become _Inside_Device_Conguration.

This button will write the factory default settings to the switch. 

Use this button to quit the Switch Conguration Utility.