Kingston Technology KNE8SE Manuel D’Utilisation

Network Configurations 

13 

EtheRx User’s Guide - Rev. B00 

Kingston Technology Company 

 
The EtheRx SE hubs use stacking ports located on the front panel to stack up to 
five SE hubs in any combination of 8-Port KNE8TP/SE and the 16-Port 
KNE16TP/SE models. Follow the directions below to stack up to five SE hubs 
together: 

1.  Locate the 5.5” shielded twisted-pair cable included with your 

package contents. 

2.  Plug one end of the cable into the port labeled, “Stack Out” on the 

first hub. 

3.  Plug the other end of the cable into the “Stack In” port on the second 

hub. 

4.  Connect power to each hub using the external AC power transformer 

included with your package contents. 

5.  Repeat the process to stack additional hubs up to a maximum of five 

(5) hubs. 

Figure 3-4 below illustrates the stacking cable connections for five 8-Port 
KNE8TP/SE hubs expanding the total number of UTP port connections from 8 
to 40 UTP ports and still be recognized as one Ethernet repeater on the 
network. A maximum of five (5) SE hubs can be stacked in any combination of 
8 and 16-Port SE hub models.