Juniper Networks EX8208 Manuel D’Utilisation
To connect the switch to a network for out-of-band management, follow instructions in
“Connecting an EX Series Switch to a Network for Out-of-Band Management” on page 187.
To connect the switch to a management console, follow instructions in “Connecting an
EX Series Switch to a Management Console” on page 181.
“Connecting an EX Series Switch to a Network for Out-of-Band Management” on page 187.
To connect the switch to a management console, follow instructions in “Connecting an
EX Series Switch to a Management Console” on page 181.
Related Topics
•
•
•
•
Unpacking an EX8200 Switch
After you prepare the installation site as described in “Site Preparation Checklist for an
EX8200 Switch” on page 91, you may unpack the switch.
EX8200 Switch” on page 91, you may unpack the switch.
NOTE: The switch is maximally protected inside the shipping box. Do not unpack it until
you are ready to begin installation.
you are ready to begin installation.
Ensure that you have the following parts and tools available to unpack the EX8200
switch:
switch:
•
A 7/16-in. or 11-mm open-end or socket wrench to remove the bracket bolts from the
shipping pallet
shipping pallet
•
A box cutter or packing knife to slice open the tape that seals the top of the box
The switch ships in a cardboard box that has a two-layer wooden pallet base with foam
cushioning between the layers. The switch chassis is bolted to the pallet base.
cushioning between the layers. The switch chassis is bolted to the pallet base.
The EX8208 chassis ships with the Switch Fabric and Routing Engine (SRE) module(s),
Switch Fabric (SF) module, fan tray, and power supplies for the configuration you ordered
already installed. Any line cards ordered ship separately.
Switch Fabric (SF) module, fan tray, and power supplies for the configuration you ordered
already installed. Any line cards ordered ship separately.
The EX8216 chassis ships with the Routing Engine (RE) module(s), SF modules, fan trays,
and power supplies for the configuration you ordered already installed. Any line cards
ordered ship separately.
and power supplies for the configuration you ordered already installed. Any line cards
ordered ship separately.
See “EX8208 Switch Configurations” on page 6 and EX8216 Switch Configurations for
information about base configurations and redundant configurations.
information about base configurations and redundant configurations.
Copyright © 2010, Juniper Networks, Inc.
126
Complete Hardware Guide for EX8208 Ethernet Switches