Juniper Networks EX8208 Manuel D’Utilisation
WARNING: Do not leave a fiber-optic transceiver uncovered except when inserting or
removing a cable. The rubber safety cap keeps the port clean and prevents accidental
exposure to laser light.
removing a cable. The rubber safety cap keeps the port clean and prevents accidental
exposure to laser light.
4.
Cover the fiber-optic cable connector with the rubber safety cap.
Related Topics
•
•
•
•
Optical Interface Support in EX2200 Switches
•
Optical Interface Support in EX3200 and EX4200 Switches
•
Optical Interface Support in EX4500 Switches
•
Removing a Transceiver from an EX Series Switch
The transceivers for EX Series switches are hot-removable and hot-insertable
field-replaceable units (FRUs): You can remove and replace them without powering off
the switch or disrupting switch functions.
field-replaceable units (FRUs): You can remove and replace them without powering off
the switch or disrupting switch functions.
Before you begin removing a transceiver from an EX Series switch, ensure that you have
taken the necessary precautions for safe handling of lasers (see “Laser and LED Safety
Guidelines and Warnings for EX Series Switches” on page 269).
taken the necessary precautions for safe handling of lasers (see “Laser and LED Safety
Guidelines and Warnings for EX Series Switches” on page 269).
Ensure that you have the following parts and tools available:
•
An antistatic bag or an antistatic mat
•
Needlenose pliers
•
Rubber safety caps to cover the transceiver and fiber-optic cable connector
•
A dust cover to cover the port
Figure 91 on page 223 shows how to remove an SFP transceiver. The procedure is the same
for all transceiver types.
for all transceiver types.
To remove a transceiver from an EX Series switch:
1.
Place the antistatic bag or antistatic mat on a flat, stable surface.
2.
Label the cable connected to the transceiver so that you can reconnect it correctly.
WARNING: Do not look directly into a fiber-optic transceiver or into the ends of
fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected to
transceivers emit laser light that can damage your eyes.
fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected to
transceivers emit laser light that can damage your eyes.
Copyright © 2010, Juniper Networks, Inc.
222
Complete Hardware Guide for EX8208 Ethernet Switches