Cisco Systems 3560 Manuel D’Utilisation
44-37
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 44 Configuring IP Multicast Routing
Configuring Optional IGMP Features
With PIM DM operation, the DR has meaning only if IGMPv1 is in use. IGMPv1 does not have an IGMP
querier election process, so the elected DR functions as the IGMP querier. With PIM SM operation, the
DR is the device that is directly connected to the multicast source. It sends PIM register messages to
notify the RP that multicast traffic from a source needs to be forwarded down the shared tree. In this
case, the DR is the device with the highest IP address.
querier election process, so the elected DR functions as the IGMP querier. With PIM SM operation, the
DR is the device that is directly connected to the multicast source. It sends PIM register messages to
notify the RP that multicast traffic from a source needs to be forwarded down the shared tree. In this
case, the DR is the device with the highest IP address.
Beginning in privileged EXEC mode, follow these steps to modify the router-query message interval.
This procedure is optional.
This procedure is optional.
To return to the default setting, use the no ip pim query-interval [seconds] interface configuration
command.
command.
Configuring Optional IGMP Features
These sections contain this configuration information:
•
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
(optional)
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface interface-id
Specify the interface to be configured, and enter interface configuration
mode.
mode.
Step 3
ip pim query-interval seconds
Configure the frequency at which the switch sends PIM router-query
messages.
messages.
The default is 30 seconds. The range is 1 to 65535.
Step 4
end
Return to privileged EXEC mode.
Step 5
show ip igmp interface [interface-id]
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.