Sony SHAKE5 Manuel

model name [SHAKE-5]

[4-462-816-12(1)] GB

filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF 
02)\4462816121_GB\06BAS.fm]

masterpage:Right

Perform the pairing procedure 
on the Bluetooth device.

For details, refer to the operating 
instructions of your Bluetooth device.

Select the model number of the 
unit on the display of the 
Bluetooth device.

For example, select 
“SONY:SHAKE-5”. 
If passkey is required on the Bluetooth 
device, enter “0000”.

Perform the Bluetooth 
connection on the Bluetooth 
device.

When pairing is completed and the 
Bluetooth connection is established, 
Bluetooth device name appears in the 
display panel.
Depending on the Bluetooth device, 
connection may start automatically 
after pairing is completed.
You can check the Bluetooth device 
address by pressing DISPLAY 
repeatedly.

• You can pair up to 9 Bluetooth devices. If the 

10th Bluetooth device is paired, the least 
recently connected device will be replaced by 
the new one.

• “Passkey” may be called “Passcode”, “PIN 

code”, “PIN number” or “Password”, etc., 
depending on the device.

• The pairing standby status of the system is 

canceled after about 5 minutes. If pairing is 
not successful, repeat from step 1.

• While connected to a Bluetooth device, this 

system cannot be detected and connection 
cannot be established from another Bluetooth 
device which is never paired before.

• If you want to pair with another Bluetooth 

device, repeat steps 1 to 6.

Hold down BLUETOOTH on the unit for 
2 seconds or more until “BLUETOOTH” 
appears in the display panel.

By touching the system with an NFC-
compatible smartphone, the system is 
turned on in Bluetooth function 
automatically, and then proceeds to 
complete pairing and the Bluetooth 
connection automatically.

NFC (Near Field Communication) is a 
technology enabling short-range wireless 
communication between various devices, 
such as mobile phones and IC tags. 
Thanks to the NFC function, data 
communication can be achieved easily 
just by touching the designated touchpoint 
on the NFC-compatible devices.

Download the free Android app from 
Google Play by searching for “NFC 
Easy Connect” or access it by using the 
two-dimensional code below. Data 
communication fees may be charged.

* Use a two-dimensional code reader app.

• The app may not be available in some 

countries/regions.

• Depending on your smartphone, you can 

use the NFC function without installing 
the app. In this case, the operations and 
specifications may be different. For 
details, refer to the operating instructions 
of your smartphone.