LOEWE 37 Manuel D’Utilisation
21 -
Adjusting the picture
Call TV menu.
Select Picture,
go to the menu line below.
Select the desired picture function,
go to the menu line below.
Make changes.
Explanations of the picture settings:
Switches the picture parameters between standard and
personal values.
Adjust contrast.
Adjust the colour.
Set warmer or colder tone for picture.
personal values.
Adjust contrast.
Adjust the colour.
Set warmer or colder tone for picture.
Adjust the brightness of the picture.
Adjust the contour sharpness of the picture.
Removes or reduces the signal noise in the picture.
Adjust the contour sharpness of the picture.
Removes or reduces the signal noise in the picture.
Call with OK.
Picture improvement on/off and Demo mode for Image+.
Set picture format (see page 22).
Move picture vertically (see page 22).
Picture improvement on/off and Demo mode for Image+.
Set picture format (see page 22).
Move picture vertically (see page 22).
Automatic detection and setting of the picture format for
Cinemascope or widescreen movies.
Reduce jolting.
The TV picture adapts to the ambient brightness. The
power consumption of the TV set is also reduced.
Cinemascope or widescreen movies.
Reduce jolting.
The TV picture adapts to the ambient brightness. The
power consumption of the TV set is also reduced.
Standard / personal values for picture adjustment
Call TV menu.
Select Picture,
go to the menu line below.
go to the menu line below.
Select Picture adjustment,
go to the menu line below.
Daily operation
Select desired values for picture,
OK call selected values for picture.
Explanations for Picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the custom
values. Every signal source (TV analogue, TV digital, HD analogue, HD
digital, PC, PhotoViewer) has its own personal values.
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
See the glossary for an explanation of the signal sources: Signal input
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the custom
values. Every signal source (TV analogue, TV digital, HD analogue, HD
digital, PC, PhotoViewer) has its own personal values.
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
See the glossary for an explanation of the signal sources: Signal input
groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
picture/sound or Factory settings picture/sound.
Operation without remote control
Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
R Radio on, or switch between TV and Radio.
Calling the TV menu on the set
M call Direct control on TV set menu,
– / + Select function.
M or R Go to the menu line below,
– / + Make changes.
M go up one menu line,
– / + Select other function.
– / + Select other function.
Brightness
Volume
Direct control on TV set
19
Contrast
Picture format
Stat
election
END
INFO
Sound
Connections
Recording
Settings
Picture
TV menu
Picture
adjustment
...
END
INFO
Contrast
C
Colour intensity
Picture adjustment
Picture (standard values, TV digital)
TV menu
Standard values (TV digital) ...
END
INFO
OK
Picture adjustment
Picture (personal values, TV digital)
TV menu
Standard values (TV digital)
Personal values (TV digital)
Picture
adjustment
Contrast
Colour intensity
Colour
temperature
Brightness
Sharpness
DNC
more ...
Image+
Picture format
Move picture
up/down
Auto format
DMM
Automatic
dimmer