Q-Logic 64 Manuel D’Utilisation
6 – Removal/Replacement
Fans
Fans
6-20
59043-03 A
D
6.6.2
Installing a Fan
To install a fan, do the following:
1.
Confirm that the new fan has the same air flow direction as the old fan. Each
fan has a part number label indicating the air flow direction as shown in
fan has a part number label indicating the air flow direction as shown in
Figure 6-9. Installing a Fan
2.
Slide the fan into the bay until it is firmly seated and fasten the screws. A fan
will fit in any bay.
will fit in any bay.
3.
Confirm the fan status. Do one of the following:
Open a Telnet session and enter the Show Chassis command to
display the operational status of the fans. Refer to the
display the operational status of the fans. Refer to the
Observe the fan status in the Switch data window of the SANbox
Manager topology display. Refer to the SANbox2-64 Switch
Management User’s Guide.
Manager topology display. Refer to the SANbox2-64 Switch
Management User’s Guide.
Part Number Label