Q-Logic 64 Manuel D’Utilisation

B – Command Line Interface
Show Config Command

B-78

59043-03 A

D

Displays switch, I/O blade, port, alarm threshold, security, and zoning for the 
current configuration.

None

blade [slot_number]
port [port_number]
security
switch
threshold
zoning

blade [slot_number]
Displays configuration parameters for the I/O blade or cross-connect blade that 
occupies the slot given by [slot_number]. If you omit [slot_number], the 
configuration parameters for all I/O and cross-connect blades are displayed.
port [port_number]
Displays configuration parameters for the port number given by [port_number]. 
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are 
specified.
security
Displays the security database Autosave parameter value.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.

The following is an example of the Show Config Port command:

SANbox2 #> show config port 3

    Port Number: 3

  ------------

  AdminState         Offline

  LinkSpeed          Auto

  PortType           GL

  SymbolicName       Port3

  ALFairness         False

  DeviceScanEnabled  True

  ForceOfflineRSCN   False

  ARB_FF             False

  InteropCredit      0