Q-Logic 64 Manuel D’Utilisation

4 – Installation

Installing a Switch

59043-03 A

4-15

D

To install the SANbox Manager application on Linux from the SANbox2 Installation 
Disk, do the following:

1.

Close all programs currently running, and insert the SANbox2 Installation 
Disk into the management workstation CD-ROM drive.

2.

Open the File Manager and double-click on the CD-ROM icon.

3.

Double click the SANbox_Manager folder, then double click the Linux folder.

4.

Double click the executable file and follow the SANbox Manager installation 
instructions.

To install the SANbox Manager application on Solaris from the SANbox2 
Installation Disk, do the following:

1.

Close all programs currently running, and insert the SANbox2 Installation 
Disk into the management workstation CD-ROM drive.

2.

Open a terminal window. If the disk isn’t already mounted, enter the 
following command:

mount /mnt/cdrom

3.

Move the directory on the disk that contains the executable. Enter the 
following command:

cd cdrom/cdrom0/sanbox~1/solaris

4.

Run the executable and follow the SANbox Manager installation instructions. 
Enter the following command:

pkgadd -d sol_pkg

Do the following to configure a switch using the SANbox Manager application. 
Refer to the SANbox2-64 Switch Management User’s Guide for more information 
about configuring a switch. You can also configure the switch using the Command 
Line Interface. Refer to 

1.

Connect to the switch using an Ethernet connection and run SANbox 
Manager.

2.

Open the Fabric menu and select Add Fabric to open the Add a New Fabric 
window.

3.

Enter a fabric name and the IP address of the switch through which to 
manage the fabric. The default IP address is 10.0.0.1. If this is a new switch,