Nortel Networks CVX 600 Manuel D’Utilisation
Cable Specifications
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
A-7
Technical Specifications
Management Console Cable Specifications
The SCC-RLTM has a single console interface. The interface uses a DB-9 plug
connector that provides an RS-232 serial connection. The CVX 600 console port
allows you to connect to any VT100-compatible console device for direct console
access, or to any modem (AT or Hayes compatible) for remote dial-up access.
connector that provides an RS-232 serial connection. The CVX 600 console port
allows you to connect to any VT100-compatible console device for direct console
access, or to any modem (AT or Hayes compatible) for remote dial-up access.
The following figure shows the DB-9 console interface connector:
DB-9 Pin and Signal Assignments
The following table lists the pin and signal assignments for the DB-9 console
interface connector:
interface connector:
Pin
Signal
To Signal
1
DCD (data carrier detect)
DCD
2
TXD (transmit data)
RXD
3
RXD (receive data)
TXD
4
DSR (data set ready)
DTR
5
GND (signal ground)
GND
6
DTR (data terminal ready)
DSR
7
CTS (clear to send)
RTS
8
RTS (request to send)
CTS
9
Not used
Not used
Console
CVX-0175B
Pin 9
Pin 1