Q-Logic SANBOX2-8C Manuel D’Utilisation

B – Command Line Interface

Zoneset Command

59042-00 A

B-65

Manages zone sets and zone set membership across the fabric.

Admin authority within a Zoning Edit session. Refer to the 

. Active, List, Zones keywords are available with User authority. You 

must close the Zoning Edit session before using the Activate and Deactivate 
keywords.

active
activate [zone_set]
add [zone_set] [zone_list or alias]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deactivate
delete [zone_set]
list
remove [zone_set] [zone_list or alias]
rename [zone_set_old] [zone_set_new]
zones [zone_set]

active
Displays the name of the active zone set. This keyword is available with User 
authority and does not require a Zoning Edit session.

activate [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active 
zone set. Close the Zoning Edit session before using this keyword.

add [zone_set] [zone_list or alias]
Adds one or more zones given by [zone_list] to the zone set given by [zone]. 
[zone_list] can be an alias. This keyword requires a Zoning Edit session.

copy [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the 
membership from the zone set given by [zone_set_source]. This keyword requires 
a Zoning Edit session.

create [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name can 
have a maximum of 64 alpha-numeric characters without spaces. This keyword 
requires a Zoning Edit session.

deactivate
Deactivates the active zone set. Close the Zoning Edit session before using this 
keyword.

delete [zone_set]
Deletes the zone set given by [zone_set]. If the specified zone set is active, the 
command is suspended until the zone set is deactivated. This keyword requires a 
Zoning Edit session.