Q-Logic SANBOX2-8C Manuel D’Utilisation
4 – Installation
Loading Firmware
4-16
59042-00 A
4.3.2
Using SANbox Manager to Load Firmware
To load the firmware using SANbox Manager, do the following:
1.
From the Faceplate display, open the Switch menu and select Load
Firmware.
Firmware.
2.
In the Firmware Upload window, browse and select the firmware file you
want to load.
want to load.
3.
In the Firmware Upload window, choose the Start button to begin the
loading process. When the firmware is finished loading, the Bytes
Transferred field displays the number of bytes transferred during the loading
process.
loading process. When the firmware is finished loading, the Bytes
Transferred field displays the number of bytes transferred during the loading
process.
4.
Choose the Close button to close the Firmware Upload window.
5.
Open the Switch menu and select Reset Switch to activate the new
firmware.
firmware.
4.3.3
Using the CLI to Load Firmware
To load the firmware using the CLI, do the following:
1.
Enter the following account name and password:
SANbox2 Login:admin
Password: password
2.
To start an Admin session, enter the following:
SANbox2 $> admin start
3.
Retrieve the firmware file. The device on which the firmware file is stored
must be running an FTP server. Enter the following command to retrieve the
firmware file from the specified IP address:
must be running an FTP server. Enter the following command to retrieve the
firmware file from the specified IP address:
SANbox2 (admin) #> image fetch username 10.0.0.254
firmwarefilenametoload firmwarefilenameonswitch
Connected to 10.0.0.254.
331 Password required for username.
Password:
230 User username logged in.
bin
200 Type set to I.
verbose
Verbose mode off.
Note:
If prompted for your password, enter your password (for that IP
Address) and press the Enter key.
Address) and press the Enter key.