Q-Logic SB2A-16B Manuel D’Utilisation

59021-09 A

1-1

Introduction

This manual describes the features and installation of the SANbox2-16 Fibre 
Channel switch, firmware version 4.1. This manual is organized as follows:

„

 describes the intended audience, related materials, safety notices, 

communications statements, laser safety information, electrostatic discharge 
sensitivity precautions, accessible parts, general program license, and 
technical support.

„

 is an overview of the switch. It describes indicator LEDs and all 

user controls and connections.

„

 describes the factors to consider when planning a fabric.

„

 explains how to install and configure the switch.

„

 describes the diagnostic methods and troubleshooting 

procedures.

„

 describes the removal/replacement procedures for all field 

replaceable units (FRUs).

„

 lists the switch specifications.

„

 describes the Command Line Interface.

Please read the communications statements and laser safety information later in 
this section. Use this manual with the SANbox2-8c/16 Switch Management User’s 
Guide.

This manual introduces users to the switch and explains its installation and 
service. It is intended for users who are responsible for installing and servicing 
network equipment.

The following manuals and materials are referenced in the text and/or provide 
additional information.

„

SANbox2-8c/16 Switch Management User’s Guide, publication number 
59022-09.

„

QLogic Switch Interoperability Guide v3.0. This PDF document can be 
downloaded at 

„

Fibre Channel-Arbitrated Loop (FC-AL-2) Rev. 6.8.