Q-Logic SB2A-16B Manuel D’Utilisation

B – Command Line Interface
Show Config Command

B-70

59021-09 A

0

Displays switch, port, alarm threshold, and zoning for the current configuration.

None

port [port_number]
switch
threshold
zoning

port [port_number]
Displays configuration parameters for the port number given by [port_number]. 
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are 
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.

The following is an example of the Show Config Port command:

SANbox2 #> show config port 3

    Port Number: 3

  ------------

  AdminState         Offline

  LinkSpeed          Auto

  PortType           GL

  SymbolicName       Port3

  ALFairness         False

  DeviceScanEnabled  True

  ForceOfflineRSCN   False

  ARB_FF             False

  InteropCredit      0

  ExtCredit          0

  FANEnabled         True

  AutoPerfTuning     False

  LCFEnabled         False

  MFSEnabled         True

  MSEnabled          True

  NoClose            False

  IOStreamGuard      Disabled

  VIEnabled          False

  PDISCPingEnable    True