Q-Logic SB2A-16B Manuel D’Utilisation

5 – Diagnostics/Troubleshooting

POST Diagnostics

59021-09 A

5-3

0

A configuration file system error blink pattern is 4 blinks followed by a two second 
pause. The 4-blink error pattern indicates that a configuration file system error has 
occurred, and that the configuration file must be recreated. Refer to 

 for more information.

To recreate the configuration file, do the following:

1.

Open a Telnet session and use the Shutdown command to close activity on 
the switch, then power down the switch. Refer to the 

.

2.

Place the switch in maintenance mode. Press and hold the Maintenance 
button, then power up the switch. Refer to 

 for more information about placing the switch in maintenance 

mode.

3.

Establish a Telnet session with the switch using the default IP address 
10.0.0.1.

telnet 10.0.0.1

4.

Enter the account name (prom) and password (prom), and press the Enter 
key.

Sanbox2 login: prom

Password:xxxx

[username@host:Itasca]% telnet 10.0.0.1

Trying 10.0.0.1...

Connected to 10.0.0.1.

Escape character is '^]'.

Recreating the configuration file will delete all switch configuration 
settings.

2 seconds