Q-Logic SANBOX Manuel D’Utilisation
5 – Fibre Alliance MIB Objects
59047-03 B
5-105
A
trapRegPort (1.3.6.1.3.94.2.3.1.2)
The UDP port to send traps to for this host. Normally this would be the standard
trap port (162). This object is an index and must be specified to create a row in
this table.
trap port (162). This object is an index and must be specified to create a row in
this table.
Syntax
INTEGER (1..2147483647)
Access
read-only
Status
mandatory
Return Value
The configured port number of where to send traps when they occur. The port
number can be configured in the switch SNMP setup parameters. Default is
162.
number can be configured in the switch SNMP setup parameters. Default is
162.
trapRegFilter (1.3.6.1.3.94.2.3.1.3)
This value defines the trap severity filter for this trap host. The connUnit will send
traps to this host that have a severity level less than or equal to this value. The
default value of this object is “warning”.
traps to this host that have a severity level less than or equal to this value. The
default value of this object is “warning”.
Syntax
FcEventSeverity
Access
read-write
Status
mandatory
Return Value
A value indicating the trap severity level. Refer to
for trap severity
levels.