Q-Logic 59047-09 C Manuel D’Utilisation

59047-09  C

7-1

This section covers the implementation details for the QLOGIC Management 
Information Bases (QLOGIC-MIB) on the SANbox switch. 

This MIB replaces the fcFxPortPhysTable module defined in 
FIBRE-CHANNEL-FE-MIB, and defines volatile control objects for ports in a 
QLogic SANbox switch. If the switch gets reset, these values revert back to the 
default values in the configuration file. 

The desired state of the FxPort. A management station may place the FxPort in a 
desired state by setting this object accordingly. The testing(3) state indicates that 
no operational frames can be passed. When a Fabric Element initializes, all 
FxPorts start with fcQxPortPhysAdminStatus in the offline(2) state. As the result of 
either explicit management action or per configuration information accessible by 
the Fabric Element, fcQxPortPhysAdminStatus is then changed to either the 
online(1) or testing(3) states, or remains in the offline state.

INTEGER {
online(1), - place port online
offline(2), - take port offline
testing(3) - initiate test procedures
}

read-write

current

Refer to 

 for fcQxPortPhysAdminStatus read values.