Q-Logic 59022-11 A 4-13 Manuel D’Utilisation
4 – Managing Switches
Configuring a Switch
59022-11 A
4-27
0
4.7.4
System Services Dialog
The System Services dialog provides a central location for you to enable or
disable any of the external user services such as Simple Network Management
Protocol (SNMP), Secure Sockets Layer (SSL), Secure SHell (SSH), embedded
switch management application, command line interface, Network Time Protocol
(NTP), and Common Information Model (CIM). To display the System Services
dialog, open the Switch menu and select Services.
disable any of the external user services such as Simple Network Management
Protocol (SNMP), Secure Sockets Layer (SSL), Secure SHell (SSH), embedded
switch management application, command line interface, Network Time Protocol
(NTP), and Common Information Model (CIM). To display the System Services
dialog, open the Switch menu and select Services.
Figure 4-12. System Services Dialog
Use caution when disabling the Embedded GUI, GUI Mgmt, Telnet, SSL, and
SSH, as it is possible to disable all access to the switch except through a serial
connection.
SSH, as it is possible to disable all access to the switch except through a serial
connection.
Embedded GUI - Embedded Graphical User Interface. Allows users to point
a browser at the switch and run the embedded switch management
application on that switch as an applet.
a browser at the switch and run the embedded switch management
application on that switch as an applet.
GUI Mgmt - Allows out-of-band management of the switch from the switch
management application (GUI). If disabled, the switch can not be specified
as the entry switch for a fabric in the GUI, but can still be managed through
an in-band connection.
management application (GUI). If disabled, the switch can not be specified
as the entry switch for a fabric in the GUI, but can still be managed through
an in-band connection.