Q-Logic 59022-11 A 4-13 Manuel D’Utilisation

4 – Managing Switches

Displaying Hardware Status

59022-11 A

4-41

0

3.

Click the Start button to begin the firmware load process. You will be shown 
a message warning you that the switch will be reset in order to activate the 
firmware.

4.

Click the OK button to continue firmware installation or click the Cancel 
button to cancel the firmware installation.

A switch is equipped with the following chassis LEDs that provide hardware status 
information:

„

Chassis Over Temperature LED - indicates the temperature status of the 
switch.

„

Fan Fail LED - indicates operational status of both fans.

„

Heartbeat LED - indicates the status of the internal switch processor and the 
results of the power-on self test (POST).

„

Input Power LED - indicates the voltage status of the switch.

In the SANbox2-8c and SANbox2-16 faceplate displays, you can display a 
summary of this status information by placing the cursor on the chassis LED 
cluster as shown in 

. Refer to the installation guide for your switch for 

more information about the chassis LEDs.