Q-Logic 59022-11 A 4-13 Manuel D’Utilisation
A – Command Line Interface
Shutdown Command
59022-11 A
A-115
0
Shutdown Command
Terminates all data transfers on the switch at convenient points and closes the
Telnet session. Always power cycle the switch after entering this command.
Telnet session. Always power cycle the switch after entering this command.
Authority
Admin session
Syntax
shutdown
Notes
Always use this command to perform an orderly shut down before removing
power from the switch.
power from the switch.
When the shutdown is complete, the Heartbeat LED is extinguished.