Q-Logic 59042-07 A Manuel D’Utilisation

1 – Introduction
Related Materials

1-2

59042-07 A

0

The following manuals and materials are referenced in the text and/or provide 
additional information.

„

SANbox2-8c/16 Switch Management User’s Guide, publication number 
59022-10.

„

QLogic Switch Interoperability Guide v3.0. This PDF document can be 
downloaded at 

„

Fibre Channel-Arbitrated Loop (FC-AL-2) Rev. 6.8.

„

Fibre Channel-10-bit Interface Rev. 2.3.

„

Definitions of Managed Objects for the Fabric Element in Fibre Channel 
Standard (draft-ietf-ipfc-fabric-element-mib-04.txt).

The Fibre Channel Standards are available from:

Global Engineering Documents, 15 Inverness Way East, Englewood, CO 
80112-5776   Phone: (800) 854-7179 or (303) 397-7956
Fax: (303) 397-2740.

The following items are new in the current firmware release:

„

The switch supports a single firmware image and a pending image. Fallback 
command is no longer supported.

„

Firmware Install command has been added to simplify the installation of 
firmware.

„

Adding a fabric in SANsurfer Switch Manager always requires a user 
account and a password. The UserAuthentication parameter has been 
removed from the Set Setup System command.

„

Warning and failure temperature thresholds are fixed at  65° and 70° C 
respectively and cannot be changed.

„

FC-SW-2 Compliant and FC-SW-2 Autosave parameters are changed to 
Interop Mode and Interop Autosave respectively

„

I/O StreamGuard can be configured to automatically recognize an initiator 
device with a QLogic HBA.