Q-Logic 59042-07 A Manuel D’Utilisation

4 – Installation

Installing a Switch

59042-07 A

4-19

0

„

The Heartbeat LED indicates the results of the POST. The POST tests 
the condition of firmware, memories, data-paths, and switch logic 
circuitry. If the Heartbeat LED blinks steadily about once per second, 
the POST was successful, and you can continue with the installation 
process. Any other blink pattern indicates that an error has occurred. 
Refer to 

 for more 

information about error blink patterns.

The application opens with the Initial Start dialog. Refer to the SANbox2-8c/16 
Switch Management User’s Guide for more information about using, exiting, and 
uninstalling SANsurfer Switch Manager.

You can configure the switch using the SANsurfer Switch Manager application or 
the command line interface. To configure the switch using SANsurfer Switch 
Manager, click the Open Configuration Wizard radio button in the Initial Start 
dialog, then click the Proceed button. The Configuration wizard explains and 
prompts you for the following configuration information:

Temporary IP address

Temporary subnet mask

Archive template file

Switch domain ID (1–-239)

Domain ID Lock (Locked/Unlocked)

Switch name

Permanent IP address

Permanent subnet mask

Permanent gateway address

Permanent network discovery method

Date and time

Admin account password

Create a configuration archive?

 through 

 for information on factory 

configuration default values.