Q-Logic 59042-07 A Manuel D’Utilisation
5 – Diagnostics/Troubleshooting
Recovering a Switch
Recovering a Switch
5-14
59042-07 A
0
5.3.7
Maintenance – Remake Filesystem
In the event of sudden loss of power, it is possible that the switch configuration
may become corrupt. The file system on which the configuration is stored must be
re-created. This option resets the switch to the factory default values including
user accounts and zoning. Refer to
may become corrupt. The file system on which the configuration is stored must be
re-created. This option resets the switch to the factory default values including
user accounts and zoning. Refer to
for the factory
default values.
5.3.8
Maintenance – Reset Switch
This option closes the Telnet session, exits maintenance mode and reboots the
switch using the current switch configuration. All unpacked firmware image files
that reside on the switch are deleted.
switch using the current switch configuration. All unpacked firmware image files
that reside on the switch are deleted.
CAUTION!
If you choose the Remake Filesystem option, you will lose all
changes made to the fabric configuration that involve that switch,
such as password and zoning changes. You must then restore the
switch from an archived configuration or reconfigure the portions
of the fabric that involve the switch.
changes made to the fabric configuration that involve that switch,
such as password and zoning changes. You must then restore the
switch from an archived configuration or reconfigure the portions
of the fabric that involve the switch.