Q-Logic 59022-03 D Manuel D’Utilisation

3 – Managing Fabrics

Displaying Fabric Information

59022-03 D

3-5

To replace a failed switch in a fabric, plug in the switch and copy the archived 
switch configuration file to the switch using the Restore function. Refer to 

 and 

 for more 

information. The switch configuration must be archived before it can be restored. 

To replace a failed switch using the SANbox Manager Restore function: 

1.

Unplug and remove the failed switch.

2.

Plug in the new replacement switch. 

3.

Open the topology display and select the replacement switch.

4.

Open the Switch menu and select Restore.

5.

In the Restore Switch window, enter a name or choose the archived switch 
configuration file to copy to the switch.

6.

Choose the OK button to write the configuration file to the switch.

The SANbox Manager application does not automatically delete switches or links 
that have failed or have been physically removed from the Fibre Channel network. 
In these cases, you can delete switches and links to bring the display up to date. If 
you delete a switch or a link that is still active, the SANbox Manager application 
will restore it automatically. You can also refresh the display. To delete a switch 
from the topology display, do the following:

1.

Select one or more switches in the topology display.

2.

Open the Switch menu and select Delete.

To delete a link, do the following:

1.

Select one or more links in the topology display.

2.

Open the Switch menu and select Delete.

The topology display is your primary tool for monitoring a fabric. The graphics 
window of the topology display provides status information for switches, 
inter-switch links, and the Ethernet connection to the management workstation.

The data window tabs show name server, switch, and active zone set information. 
The Active Zoneset tab shows the zone definitions for the active zone set. Refer 
to 

 and 

 for information about the Name Server and Switch data windows.