Q-Logic 59022-03 D Manuel D’Utilisation
4 – Managing Switches
Restoring a Switch
4-16
59022-03 D
4.8
Restoring a Switch
Restoring a switch loads the archived switch configuration parameters to the
switch. The switch configuration must be archived before it can be restored.
Refer to
switch. The switch configuration must be archived before it can be restored.
Refer to
for more information.
It is good practice to archive and restore configurations from like switches. This
means restoring a SANbox2-16 switch with a SANbox2-16 archive file, or
restoring a SANbox2-8c with a SANbox2-8c archive file. If it is necessary to
restore a switch with a dissimilar archive file, consider the following:
means restoring a SANbox2-16 switch with a SANbox2-16 archive file, or
restoring a SANbox2-8c with a SANbox2-8c archive file. If it is necessary to
restore a switch with a dissimilar archive file, consider the following:
■
If you restore a SANbox2-8c switch with a SANbox2-16 archive file, the
configuration for ports 0-7 on the SANbox2-8c switch will be restored.
Archive information for ports 8-15 will be ignored.
configuration for ports 0-7 on the SANbox2-8c switch will be restored.
Archive information for ports 8-15 will be ignored.
■
If you restore a SANbox2-16 switch with a SANbox2-8c archive file, the
configuration for ports 0-7 on the SANbox2-16 switch will be restored. Ports
8-15 wil be unchanged.
configuration for ports 0-7 on the SANbox2-16 switch will be restored. Ports
8-15 wil be unchanged.
The Restore menu item is not available for the inband switches. You can only
restore a switch out-of-band (the fabric management switch). To restore a switch,
do the following:
restore a switch out-of-band (the fabric management switch). To restore a switch,
do the following:
1.
Open the Switch menu and select Restore.
2.
In the Restore window, enter the switch configuration file name or browse for
the file.
the file.
3.
Choose the Restore button.
4.9
Loading Firmware
The switch does not have to offline to download firmware. However, the switch
must be reset to activate the new firmware, which does require admin authority.
SANbox Manager will prompt you to reset the switch after the firmware is loaded.
The To load firmware to a switch, do the following:
must be reset to activate the new firmware, which does require admin authority.
SANbox Manager will prompt you to reset the switch after the firmware is loaded.
The To load firmware to a switch, do the following:
1.
In the faceplate display, open the Switch menu and select Load Firmware.
2.
In the Firmware Upload window, choose the Select button to browse and
select the firmware file to be uploaded.
select the firmware file to be uploaded.
3.
Choose the Start button to begin the firmware load process.
4.
When the loading is complete, choose the Close button to close the
Firmware Upload window.
Firmware Upload window.
5.
The application prompts you to reset the switch. Choose the OK button to
reset the switch and implement the new firmware.
reset the switch and implement the new firmware.