Q-Logic 5200 Manuel D’Utilisation

59056-02 A

1-1

Introduction

This manual describes the switch management tools which include the SANsurfer 
Switch Manager application (version 4.02) and the Command Line Interface (CLI) 
for the SANbox 5200 Series Fibre Channel switches (firmware version 4.2). This 
includes the model 5200 switch and the model 5202 switch with dual replaceable 
power supplies. The SANbox 5200 Series switches are 20 port non-blocking Fibre 
Channel switches. This manual defines the features, components, and 
performance characteristics of the SANbox 5200 Series switches. The SANsurfer 
Switch Manager application is the primary focus of this manual which is organized 
as follows:

„

 describes the intended audience for this manual, related 

materials, and technical support.

„

 describes how to use SANsurfer Switch Manager, its menus, and 

its displays.

„

 describes fabric management tasks.

„

 describes switch management tasks.

„

 describes port and device management tasks.

„

 describes the command line interface.

A glossary of terms and an index are also provided.

This manual introduces the switch management products and explains their 
installation and use. It is intended for users responsible for installing and using 
switch management tools.

Refer to the following manuals for information about switch hardware and 
installation.

„

SANbox 5200 Series Fibre Channel Switch Installation Guide, publication 
number 59055-02 Rev. A.