Q-Logic 5200 Manuel D’Utilisation
A – Command Line Interface
Reset Command
Reset Command
A-32
59056-02 A
0
Clears the event log. To save the event log before resetting, refer to the
To reset the switch with a power-on self test, refer to the
.
system
Resets the system configuration settings to the factory default values. Refer to
Resets the system configuration settings to the factory default values. Refer to
for system configuration default values.
zoning
Clears the zoning database and deactivates the active zone set. The zoning
configuration values (autosave, default visibility) remain unchanged.
Clears the zoning database and deactivates the active zone set. The zoning
configuration values (autosave, default visibility) remain unchanged.
Notes
The following tables specify the various factory default settings:
Note:
Because this keyword changes network parameters, the
workstation could lose communication with the switch.
workstation could lose communication with the switch.
This keyword does not affect installed license keys.
Table A-3. Switch Configuration Defaults
Parameter
Default
Admin State
Online
Broadcast Enabled
True
InbandEnabled
True
FDMIEnabled
True
FDMIEntries
1000
Domain ID
1 (0x Hex)
Domain ID Lock
False
Symbolic Name
SANbox Manager
R_A_TOV
10000
E_D_TOV
2000
Principal Priority
254
Configuration Description
Default Config