Q-Logic 5200 Manuel D’Utilisation

A – Command Line Interface

Show Command

59056-02 A

A-63

0

ns [option]
Displays name server information for the specified [option]. If you omit [option], 
name server information for the local domain ID is displayed. [option] can have the 
following values:

all
Displays name server information for all switches and ports.
[domain_id]
Displays name server information for the switch given by [domain_id]. 
[domain_id] is a switch domain ID.
[port_id]
Displays name server information for the port given by [port_id]. [port_id] is a 
port Fibre Channel address.

pagebreak
Displays the current pagebreak setting. The pagebreak setting limits the display of 
information to 20 lines (On) or allows the continuous display of information without 
a break (Off).
perf [option]
Displays performance information for all ports. Refer to the 

port [port_number]
Displays operational information for the port given by [port_number]. Ports are 
numbered beginning with 0. If [port number] is omitted, information is displayed for 
all ports. 

 describes the port parameters.

AIinit

Incremented each time the port begins AL initialization.

AIinitError

Number of times the port entered initialization and the 
initialization failed.

Bad Frames

Number of frames that have framing errors.

ClassXFramesIn

Number of class x frames received by this port.

ClassXFramesOut

Number of class x frames sent by this port.

ClassXWordsIn

Number of class x words received by this port.

ClassXWordsOut

Number of class x words sent by this port.

ClassXToss

Number of times an SOFi3 or SOFn3 frame is tossed from 
TBUF.

DecodeError

Number of decode errors detected