Q-Logic SANBOX2 Manuel D’Utilisation
6 – Fabric Element MIB Objects
6-12
59047-03 B
A
6.5
The Status Group
The objects described in this section are in table format indexed by switch index
and port index. An example of how to access one of these objects is: "snmpget
localhost public fcFxPortId.1.1". This group consists of tables that contain
operational status and established service parameters for the Fabric Element and
the attached NxPorts.
and port index. An example of how to access one of these objects is: "snmpget
localhost public fcFxPortId.1.1". This group consists of tables that contain
operational status and established service parameters for the Fabric Element and
the attached NxPorts.
This group consists of tables that contains operational status and established
service parameters for the Fabric Element and the attached NxPorts. This table
contains one entry for each FxPort, and the operational status and parameters of
the FxPorts.
service parameters for the Fabric Element and the attached NxPorts. This table
contains one entry for each FxPort, and the operational status and parameters of
the FxPorts.
fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1)
The address identifier by which this FxPort is identified within the fabric. The
FxPort may assign its address identifier to its attached NxPort(s) during Fabric
Login.
FxPort may assign its address identifier to its attached NxPort(s) during Fabric
Login.
Syntax
FcAddressId
Access
read-only
Status
current
Return Value
The address of each port based on Domain, Area, and ALPA. Example, 64 03
00.
00.
fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2)
The number of buffers currently available for receiving frames from the attached
port in the buffer-to-buffer flow control. The value should be less than or equal to
fcFxPortBbCredit.
port in the buffer-to-buffer flow control. The value should be less than or equal to
fcFxPortBbCredit.
Syntax
Gauge32
Access
read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".