Netgear M4100-50G Manuel D’Utilisation

This command establishes a new DiffServ policy. The <policyname> parameter is a 
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. 
The type of policy is specific to the inbound traffic direction as indicated by the parameter

The CLI mode is changed to Policy-Map Config when this command 

is successfully executed.

This command eliminates an existing DiffServ policy. The <policyname> parameter is the 
name of an existing DiffServ policy. This command might be issued at any time. If the policy is 
referenced by one or more interface service attachments, this delete attempt fails.

no policy-map <policyname> 

This command changes the name of a DiffServ policy. The <policyname> is the name of 
an existing DiffServ class. The <newpolicyname> parameter is a case-sensitive 
alphanumeric string from 1 to 31 characters uniquely identifying the policy.

policy-map rename <policyname> <newpolicyname>

DiffServ Service Commands

Use the DiffServ service commands to assign a DiffServ traffic conditioning policy, which you 
specified by using the policy commands, to an interface in the incoming direction

The service commands attach a defined policy to a directional interface. You can assign only 
one policy at any one time to an interface in the inbound direction. DiffServ is not used in the 
outbound direction.

This set of commands consists of service addition/removal.

The CLI command root is service-policy.

policy-map <policyname> [in|out]

Global Config

Global Config

Global Config