Netgear M4100-50G Manuel D’Utilisation
Spanning Tree
Adminmode
Adminmode
Spanning Tree
Version
Version
BPDU Guard
Mode
Mode
BPDU Filter
Mode
Mode
Configuration
Name
Name
Configuration
Revision Level
Revision Level
Configuration
Digest Key
Digest Key
Configuration
Format Selector
Format Selector
MST Instances
Switching Commands
47
ProSafe M4100 and M7100 Managed Switches
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree
instance. The <vlanid> corresponds to an existing VLAN ID.
instance. The <vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Mode
• Privileged EXEC
• User EXEC
VLAN Identifier
Associated
Instance
Instance
VLAN Commands
This section describes the commands you use to configure VLAN settings.
Term
Definition
Enabled or disabled.
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE 802.1d) based
upon the Force Protocol Version parameter.
upon the Force Protocol Version parameter.
Enabled or disabled.
Enabled or disabled.
Identifier used to identify the configuration currently being used.
Identifier used to identify the configuration currently being used.
A generated Key used in the exchange of the BPDUs.
Specifies the version of the configuration format being used in the exchange of BPDUs.
The default value is zero.
The default value is zero.
List of all multiple spanning tree instances configured on the switch.
Term
Definition
The VLANs associated with the selected MST instance.
Identifier for the associated multiple spanning tree instance or “CST” if associated with
the Common and Internal Spanning Tree.
the Common and Internal Spanning Tree.