Netgear M4100-50G Manuel D’Utilisation
Quality of Service (QoS) Commands
494
ProSafe M4100 and M7100 Managed Switches
Interface Auto VoIP
Operational Status
Mode
--------- --------------
------------------
0/1
Disabled
Down
0/2
Disabled
Down
0/3
Disabled
Down
0/4
Disabled
Down
Example: The following shows an example of a CLI display output for the command.
(Netgear Switch)# show auto-voip oui-based interface all
VoIP VLAN Id................................... 2
Priority....................................... 7
Priority....................................... 7
Interface Auto VoIP
Operational Status
Mode
--------- --------------
------------------
0/1
Disabled
Down
0/2
Disabled
Down
0/3
Disabled
Down
0/4
Disabled
Down
0/5
Disabled
Down
show auto-voip oui-table
This command lists all of the configured OUIs.
Format
show auto-voip oui-table
Mode
• Privileged EXEC
• User EXEC
OUI
Status
OUI Description
Example: show auto-voip oui-table
OUI Status
Description
--------- ---------- ---------
00:01:E3 Default SIEMENS
00:03:6B Default CISCO1
00:01:01 Configured
VoIP phone
iSCSI Commands
The tasks involved in providing automated QoS preferential treatment of iSCSI flows can be
divided into the following categories:
divided into the following categories:
Term
Definition
OUI of the source MAC address
Default or Configured entry.
Description of the OUI