Netgear M4100-50G Manuel D’Utilisation

Use this command to save running configuration changes to NVRAM so that the changes 
you make will persist across a reboot. This command is the same as copy 
system:running config nvram:startup-config

.

write memory

Simple Network Time Protocol (SNTP) Commands

This section describes the commands you use to automatically configure the system time 
and date by using SNTP.

This command sets the poll interval for SNTP broadcast clients in seconds as a power of two 
where <poll-interval> can be a value from 6 to 10.

sntp broadcast client poll-interval <poll-interval>

This command resets the poll interval for SNTP broadcast client back to the default value.

no sntp broadcast client poll-interval

{image1 | image2}

unit://<unit>/{image1 | 
image2}

Copy an image from the management node to a given 
node in a Stack. Use the unit parameter to specify the 
node to which the image should be copied. 

{image1 | image2}

unit://*/{image1 | 
image2}

Copy an image from the management node to all of 
the nodes in a Stack.

Privileged EXEC

6

Global Config

Global Config