Netgear M4100-50G Manuel D’Utilisation
Management Commands
640
ProSafe M4100 and M7100 Managed Switches
no crypto key generate rsa
Use this command to delete the RSA key files from the device.
Format
no crypto key generate rsa
Mode
crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded DSA key files.
existing generated or downloaded DSA key files.
Format
crypto key generate dsa
Mode
no crypto key generate dsa
Use this command to delete the DSA key files from the device.
Format
no crypto key generate dsa
Mode
Hypertext Transfer Protocol (HTTP) Commands
This section describes the commands you use to configure HTTP and secure HTTP access
to the switch. Access to the switch by using a Web browser is enabled by default. Everything
you can view and configure by using the CLI is also available by using the Web.
to the switch. Access to the switch by using a Web browser is enabled by default. Everything
you can view and configure by using the CLI is also available by using the Web.
ip http server
Use this command to enable access to the switch through the Web interface. When access is
enabled, the user can login to the switch from the Web interface. When access is disabled,
the user cannot login to the switch's Web server. Disabling the Web interface takes effect
immediately. All interfaces are affected.
enabled, the user can login to the switch from the Web interface. When access is disabled,
the user cannot login to the switch's Web server. Disabling the Web interface takes effect
immediately. All interfaces are affected.
Default
Format
ip http server
Mode
Global Config
Global Config
Global Config
enabled
Privileged EXEC