Netgear M4100-50G Manuel D’Utilisation

When the interface is specified:

.

Provisioning (IEEE 802.1p) Commands

This section describes the commands you use to configure provisioning, which allows you to 
prioritize ports.

This command configures the port priority assigned for untagged packets for all ports 
presently plugged into the device. The range for the priority is 0-7. Any subsequent per port 
configuration will override this configuration setting.

vlan port priority all <priority>

This command configures the default 802.1p port priority assigned for untagged packets for a 
specific interface. The range for the priority is 0–7.

vlan priority <priority>

Protected Ports Commands

This section describes commands you use to configure and view protected ports on a switch. 
Protected ports do not forward traffic to each other, even if they are on the same VLAN. 
However, protected ports can forward traffic to all unprotected ports in their group. 
Unprotected ports can forward traffic to both protected and unprotected ports. Ports are 
unprotected by default.

The admin mode of the Voice VLAN on the interface.

The Voice VLAN ID

The do1p priority for the Voice VLAN on the port.

The tagging option for the Voice VLAN traffic.

The Override option for the voice traffic arriving on the port.

The operational status of Voice VLAN on the port.

Global Config

0

Interface Config