Netgear M4100-50G Manuel D’Utilisation

This command displays 802.1x port security user information for locally configured users.

show dot1x users

 

802.1X Supplicant Commands 

802.1X (“dot1x”) supplicant functionality is on point-to-point ports. The administrator can 
configure the user name and password used in authentication and capabilities of the 
supplicant port.

Use this command to set the port’s dot1x role. The port can serve as either a supplicant or an 
authenticator.

dot1x pae {supplicant | authenticator}

Identifies the Filter ID returned by the RADIUS server when the client was authenticated. 
This is a configured DiffServ policy name on the switch.

The VLAN assigned to the port.

VLAN Assigned The reason the VLAN identified in the VLAN ID field has been assigned to the port. 

Possible values are RADIUS, Unauthenticated VLAN, or Default. When the VLAN 

Assigned reason is Default, it means that the VLAN was assigned to the port because 

the PVID of the port was that VLAN ID.

This value indicates the time for which the given session is valid. The time period in 
seconds is returned by the RADIUS server on authentication of the port. This value is 
valid for the port only when the port-control mode is not MAC-based.

This value indicates the action to be taken once the session timeout expires. Possible 
values are Default and Radius-Request. If the value is Default, the session is terminated 
and client details are cleared. If the value is Radius-Request, a reauthentication of the 
client is performed.

Privileged EXEC

Users configured locally to have access to the specified port.

Interface Config