Fujitsu eLux NG S26361-F2600-L134 Manuel D’Utilisation
Codes de produits
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
81
3. Click
Apply
and then Yes in the eLux NG Starter dialog box.
4. When the device restarts, it will attempt to contact the access point using unencrypted
wireless LAN.
To set client-side encryption settings
This section explains how to activate Wired Equivalent Privacy (WEP) with static keys for your
client in an enterprise network. WEP is an optional feature based on the IEEE 802.11b
standard that provides data confidentiality. Using WEP involves packet-by-packet data
encryption by the transmitting device and decryption by the receiving device. The 350 Series
supports high-speed WEP at 40 and 128 bits.
Encryption settings are made in the Client Encryption Manager (CEM) portion of the Cisco
Aironet Client Utility.
client in an enterprise network. WEP is an optional feature based on the IEEE 802.11b
standard that provides data confidentiality. Using WEP involves packet-by-packet data
encryption by the transmitting device and decryption by the receiving device. The 350 Series
supports high-speed WEP at 40 and 128 bits.
Encryption settings are made in the Client Encryption Manager (CEM) portion of the Cisco
Aironet Client Utility.
Figure 53: Setup > Hardware > Wireless LAN > Edit button
1. From
the
Setup
tab, click the Hardware subtab. Click the Edit button. The Aironet Client
Utility appears (command line equivalent: “acu”).
Note
If the Edit button is not displayed, select WLAN Aironet from the Network type list.
Click Apply and then Yes in the eLux NG Starter dialog box. After restarting, the Edit
button will be present.
button will be present.