3com 8800 Manuel D’Utilisation
12
C
HAPTER
2: S
YSTEM
D
ESCRIPTION
Distribution Panel
The distribution panel consists of DC output sockets and three AC input sockets.
Refer to Figure 7.
Refer to Figure 7.
Figure 7
Distribution Panel
The three EN60320 C20 AC input sockets on the front panel of the device are rated
at 20A@250VAC. Each socket supplies power to one power supply module. There is
an AC power ON/OFF switch beside each AC input socket for individual power
switching.
at 20A@250VAC. Each socket supplies power to one power supply module. There is
an AC power ON/OFF switch beside each AC input socket for individual power
switching.
The DC distribution panel has Copper bus bars and two 4 AWG/570mm cables with
OT25-8 terminals to provide 54VDC output of the device. Use the two cables to
connect the power rack and the Switch 8800 chassis. The output socket on the left is
marked “-” (negative). The output socket on the right is marked “+” (positive).
OT25-8 terminals to provide 54VDC output of the device. Use the two cables to
connect the power rack and the Switch 8800 chassis. The output socket on the left is
marked “-” (negative). The output socket on the right is marked “+” (positive).