3com 3C16703A Mode D'Emploi

Page de 40
6
C
REATING
 
YOUR
 N
ETWORK
What Else Do I Need?
Your OfficeConnect hub comes with:
One power adapter for use with the OfficeConnect hub.
A Product Registration card for you to fill out and return.
Four rubber feet.
A stacking clip.
Two unit labels and eight cable ties.
An OfficeConnect Network Assistant CD-ROM.
To connect workstations and additional OfficeConnect hubs 
to your hub, you need extra equipment. The extra 
equipment listed in the next section is not provided with 
the hub.
Workstation Connections
To connect workstations and other equipment to your hub, 
you need:
1
10BASE-T connections for all 
your equipment. 3Com produce 
a range of easy to install 
network adapter cards, which 
provide your workstations with 
10BASE-T connections.
2
An operating system (for example, Netware or 
Windows 95/98) with network support configured, 
running on your workstations.
3
One straight-through TP cable for every workstation, as 
shown in Figure 2.
In order to comply with the 10BASE-T standard, ports 
designed for workstation connections have been 
marked with the graphical symbol ‘x’. This denotes a 
crossover in the port’s internal wiring, for example 1x, 
2x, 3x...
Transceiver Connections
If you want to connect a transceiver to your hub (Hub 4C 
only), you need:
An AUI cable. The maximum length you can use is 50m 
(164ft).
A 10Mbps Ethernet transceiver for the chosen media 
type. 3Com produce a range of easy to use transceivers.
3
2
1
3C16700.book  Page 6  Wednesday, July 7, 1999  5:46 PM