3com WX3000 Manuel D’Utilisation

 

2-2 

As shown in 

, it is required to bind the MAC and IP addresses of Host 1 to GigabitEthernet 

1/0/1 on switch A, so as to prevent malicious users from using the IP address they steal from Host 1 to 

access the network. 

Figure 2-1 Network diagram for port binding configuration 

Switch A

GE1/0/1

Switch B

IP Address: 10.12.1.1

MAC: 0001- 0002- 0003

Host 2

Host 1

 

 

Configure switch A as follows: 

# Enter system view. 

<device> system-view 

# Enter GigabitEthernet 1/0/1 port view. 

[device] interface GigabitEthernet 1/0/1 

# Bind the MAC address and the IP address of Host 1 to GigabitEthernet 1/0/1. 

[device-GigabitEthernet1/0/1] am user-bind mac-addr 0001-0002-0003 ip-addr 10.12.1.1