3com WX3000 Manuel D’Utilisation

 

1-16 

In system 
view 

dot1x supp-proxy-check 
{ logoff | trap } [ interface 
interface-list ] 

interface interface-type 
interface-number 

dot1x supp-proxy-check 
{ logoff | trap } 

Enable proxy 
checking for a 
port/specified 
ports 

In port view 

quit 

Required 

By default, the 802.1x proxy 
checking is disabled on a port. 

 

z 

The proxy checking function needs the cooperation of an iNode client program. 

z 

The proxy checking function depends on the online user handshaking function. To enable the 

proxy detecting function, you need to enable the online user handshaking function first. 

z 

The configuration listed in the table above takes effect only when it is performed on iMC as well as 

on the device. In addition, the client version checking function needs to be enabled on the device 

too (by using the dot1x version-check command).  

 

Follow these steps to configure client version checking: 

Enter system view 

—

 

In system view 

dot1x version-check [ interface 
interface-list ] 

interface interface-type 
interface-number 

Enable 
iNode client 
version 
checking 

In port view 

Required 

By default, iNode client 
version checking is disabled 
on a port. 

Set the maximum number of 
retires to send version 
checking request packets  

dot1x retry-version-max 
max-retry-version-value 

Optional 

By default, the maximum 
number of retires to send 
version checking request 
packets is 3. 

Set the client version checking 
period timer 

dot1x timer ver-period 
ver-period-value 

Optional 

By default, the timer is set to 
30 seconds.