3com WX3000 Manuel D’Utilisation

 

2-11 

Enter system view 

— 

Create a RADIUS scheme and 
enter its view 

radius scheme 
radius-scheme-name 

Required 

By default, a RADIUS scheme 
named "system" has already 
been created in the system. 

Set the IP address and port 
number of the primary RADIUS 
authentication/authorization 
server 

primary authentication 
ip-address [ port-number ] 

Required 

By default, the IP address and 
UDP port number of the 
primary server are 0.0.0.0 and 
1812 respectively for a newly 
created RADIUS scheme. 

Set the IP address and port 
number of the secondary 
RADIUS 
authentication/authorization 
server 

secondary authentication 
ip-address [ port-number ] 

Optional 

By default, the IP address and 
UDP port number of the 
secondary server are 0.0.0.0 
and 1812 respectively for a 
newly created RADIUS 
scheme. 

 

z 

The authentication response sent from the RADIUS server to the RADIUS client carries 

authorization information. Therefore, you need not (and cannot) specify a separate RADIUS 

authorization server. 

z 

In an actual network environment, you can specify one server as both the primary and secondary 

authentication/authorization servers, as well as specifying two RADIUS servers as the primary and 

secondary authentication/authorization servers respectively. 

z 

The IP address and port number of the primary authentication server used by the default RADIUS 

scheme "system" are 127.0.0.1 and 1645. 

 

Follow these steps to configure RADIUS accounting servers: 

Enter system view 

— 

Create a RADIUS scheme and 
enter its view 

radius scheme 
radius-scheme-name 

Required 

By default, a RADIUS scheme 
named "system" has already 
been created in the system. 

Set the IP address and port 
number of the primary RADIUS 
accounting server 

primary accounting 
ip-address [ port-number ] 

Required 

By default, the IP address and 
UDP port number of the 
primary accounting server are 
0.0.0.0 and 1813 for a newly 
created RADIUS scheme.