3com WX3000 Manuel D’Utilisation

 

2-21 

Set the IP address and port 
number of the primary 
TACACS authentication server 

primary authentication 
ip-address [ port ] 

Required 

By default, the IP address of 
the primary authentication 
server is 0.0.0.0, and the port 
number is 0. 

Set the IP address and port 
number of the secondary 
TACACS authentication server 

secondary authentication 
ip-address [ port ] 

Optional 

By default, the IP address of 
the secondary authentication 
server is 0.0.0.0, and the port 
number is 0. 

 

z 

You are not allowed to configure the same IP address for both primary and secondary 

authentication servers. If you do this, the system will prompt that the configuration fails. 

z 

You can remove an authentication server setting only when there is no active TCP connection that 

is sending authentication messages to the server. 

 

Follow these steps to configure TACACS authorization servers: 

Enter system view 

— 

Create a HWTACACS scheme 
and enter its view 

hwtacacs scheme 
hwtacacs-scheme-name 

Required 

By default, no HWTACACS 
scheme exists. 

Set the IP address and port 
number of the primary 
TACACS authorization server 

primary authorization 
ip-address [ port ] 

Required 

By default, the IP address of 
the primary authorization 
server is 0.0.0.0, and the port 
number is 0. 

Set the IP address and port 
number of the secondary 
TACACS authorization server 

secondary authorization 
ip-address [ port ] 

Optional 

By default, the IP address of 
the secondary authorization 
server is 0.0.0.0, and the port 
number is 0.