3com WX3000 Manuel D’Utilisation

 

1-3 

After a DHCP server dynamically assigns an IP address to a DHCP client, the IP address keeps valid 

only within a specified lease time and will be reclaimed by the DHCP server when the lease expires. If 

the DHCP client wants to use the IP address for a longer time, it must update the IP lease.  

By default, a DHCP client updates its IP address lease automatically by unicasting a DHCP-REQUEST 

packet to the DHCP server when half of the lease time elapses. The DHCP server responds with a 

DHCP-ACK packet to notify the DHCP client of a new IP lease if the server can assign the same IP 

address to the client. Otherwise, the DHCP server responds with a DHCP-NAK packet to notify the 

DHCP client that the IP address will be reclaimed when the lease time expires.  

If the DHCP client fails to update its IP address lease when half of the lease time elapses, it will update 

its IP address lease by broadcasting a DHCP-REQUEST packet to the DHCP servers again when 

seven-eighths of the lease time elapses. The DHCP server performs the same operations as those 

described above.  

DHCP has eight types of packets. They have the same format, but the values of some fields in the 

packets are different. The DHCP packet format is based on that of the BOOTP packets. The following 

figure describes the packet format (the number in the brackets indicates the field length, in bytes):  

Figure 1-2 DHCP packet format 

op (1)

0

7

15

htype (1)

hlen (1)

hops (1)

xid (4)

23

31

secs (2)

flags (2)

ciaddr (4)

yiaddr (4)

siaddr (4)

giaddr (4)

chaddr (16)

sname (64)

file (128)

options (variable)

 

 

The fields are described as follows: 

z 

op: Operation types of DHCP packets, 1 for request packets and 2 for response packets.  

z 

htype, hlen: Hardware address type and length of the DHCP client.  

z 

hops: Number of DHCP relay agents which a DHCP packet passes. For each DHCP relay agent 

that the DHCP request packet passes, the field value increases by 1.  

z 

xid: Random number that the client selects when it initiates a request. The number is used to 

identify an address-requesting process.  

z 

secs: Elapsed time after the DHCP client initiates a DHCP request.  

z 

flags: The first bit is the broadcast response flag bit, used to identify that the DHCP response 

packet is a unicast (set to 0) or broadcast (set to 1). Other bits are reserved.  

z 

ciaddr: IP address of a DHCP client.  

z 

yiaddr: IP address that the DHCP server assigns to a client.