3com WX3000 Manuel D’Utilisation

 

3-7 

[device-ui-vty0] authentication-mode password 

# Set the local password to 123456 (in plain text). 

[device-ui-vty0] set authentication password simple 123456 

# Specify commands of level 2 are available to users logging in to VTY 0. 

[device-ui-vty0] user privilege level 2 

# Configure Telnet protocol is supported. 

[device-ui-vty0] protocol inbound telnet 

# Set the maximum number of lines the screen can contain to 30. 

[device-ui-vty0] screen-length 30 

# Set the maximum number of commands the history command buffer can store to 20. 

[device-ui-vty0] history-command max-size 20 

# Set the timeout time to 6 minutes. 

[device-ui-vty0] idle-timeout 6 

Follow these steps to perform Telnet configuration with the authentication mode being scheme: 

Enter system view 

— 

Enter the 
default ISP 
domain view 

domain domain-name 

Configure the 
AAA scheme 
to be applied 
to the domain 

scheme { local | none | 
radius-scheme 
radius-scheme-name 
[ local ] | hwtacacs-scheme 
hwtacacs-scheme-name 
[ local ] } 

Configure 
the 
authenticati
on scheme 

Quit to 
system view 

Optional 

By default, the local AAA scheme is 
applied. If you specify to apply the 
local AAA scheme, you need to 
perform the configuration 
concerning local user as well. 

If you specify to apply an existing 
scheme by providing the 
radius-scheme-name argument, 
you need to perform the following 
configuration as well: 

z 

Perform AAA and RADIUS 
configuration on the switching 
engine. (Refer to the AAA part 
for more.) 

z 

Configure the user name and 
password accordingly on the 
AAA server. (Refer to the user 
manual of the AAA server.) 

Create a local user and enter 
local user view 

local-user user-name 

No local user exists by default. 

Set the authentication 
password for the local user 

password { simple | cipher } 
password 

Required 

Specify the service type for 
VTY users 

service-type telnet [ level 
level ]  

Required 

Quit to system view 

—