3com WX3000 Manuel D’Utilisation

 

1-10 

Enter system view 

— 

Apply an ACL to a VLAN 

packet-filter vlan vlan-id 
inbound acl-rule 

Required 

For description on the acl-rule 
argument, refer to ACL Command. 

 

# Apply ACL 2000 to VLAN 10 to filter the inbound packets of VLAN 10 on all the ports.  

<device> system-view 

[device] packet-filter vlan 10 inbound ip-group 2000 

Before applying ACL rules to a VLAN, you need to define the related ACLs. For information about 

defining an ACL, refer to 

Follow these steps to assign an ACL to a port group: 

Enter system view 

— 

Enter port group view 

port-group group-id 

— 

Apply an ACL to the port 
group 

packet-filter inbound acl-rule 

Required 

For description on the acl-rule 
argument, refer to ACL Command. 

 

After an ACL is assigned to a port group, it will be automatically assigned to the ports that are 

subsequently added to the port group.  

 

# Apply ACL 2000 to port group 1 to filter the inbound packets on all the ports in the port group.  

<device> system-view 

[device] port-group 1 

[device-port-group-1] packet-filter inbound ip-group 2000