3com WX3000 Manuel D’Utilisation

 

1-21 

z 

The ACL rules used for traffic classification are defined. Refer to the ACL module of this manual for 

information about defining ACL rules. 

z 

The rate limit for traffic policing, and the actions for the packets exceeding the rate limit are 

determined. 

You can configure traffic policing for all the packets matching specific ACL rules, or for the packets that 

match specific ACL rules and are of a VLAN, of a port group, or pass a port.  

Follow these steps to configure traffic policing for all the packets matching specific ACL rules: 

Enter system view 

system-view 

— 

Configure traffic 
policing 

traffic-limit inbound acl-rule target-rate 
[ conform con-action ] [ exceed 
exceed-action ] [ meter-statistic ] 

Required 

By default, traffic policing is 
disabled. 

Clear the traffic 
policing statistics 

reset traffic-limit inbound acl-rule 

Optional 

 

Follow these steps to configure traffic policing for packets that are of a VLAN and match specific ACL 

rules: 

Enter system view 

system-view 

— 

Configure traffic 
policing 

traffic-limit vlan vlan-id inbound acl-rule 
target-rate [ conform con-action ] [ exceed 
exceed-action ] [ meter-statistic ] 

Required 

By default, traffic policing is 
disabled. 

Clear the traffic 
policing statistics 

reset traffic-limit vlan vlan-id inbound 
acl-rule 

Optional 

 

Follow these steps to configure traffic policing for packets that are of a port group and match specific 

ACL rules: 

Enter system view 

system-view 

— 

Enter port group view 

port-group group-id 

— 

Configure traffic 
policing 

traffic-limit inbound acl-rule target-rate 
[ conform con-action ] [ exceed 
exceed-action ] [ meter-statistic ] 

Required 

By default, traffic policing is 
disabled. 

Clear the traffic 
policing statistics 

reset traffic-limit inbound acl-rule 

Optional 

 

Follow these steps to configure traffic policing for packets passing a port and matching specific ACL 

rules: