3com WX3000 Manuel D’Utilisation

 

1-8 

z 

The MAC address to be matched is determined. 

z 

The destination port is determined. 

Follow these steps to configure MAC-based mirroring: 

Enter system view 

system-view 

— 

Create a local or remote source 
mirroring group 

mirroring-group group-id 
{ local | remote-source } 

Required 

Configuring MAC-Based 
Mirroring 

mirroring-group group-id 
mirroring-mac mac vlan 
vlan-id 

Required 

Configure the destination port 
for the mirroring group 

mirroring-group group-id 
monitor-port monitor-port-id 

Required 

Note that you need not 
configure the destination port 
on the source switch when 
configuring MAC-based remote 
mirroring. 

 

Configure MAC-based mirroring to mirror packets whose source/destination MAC addresses match 

000f-e20f-0101 to port GigabitEthernet 1/0/2 on the local device. 

Configuration procedure: 

<device> system-view 

[device] mac-address static 000f-e20f-0101 interface Gigabitethernet 1/0/1 vlan 2 

[device] mirroring-group 1 local 

[device] mirroring-group 1 mirroring-mac 000f-e20f-0101 vlan 2 

[device] mirroring-group 1 monitor-port GigabitEthernet 1/0/2 

 

You can configure VLAN-based mirroring for a remote source mirroring group to implement the 

VLAN-based remote mirroring function. 

 

z 

The VLAN to be monitored is determined. 

z 

The destination port is determined.