3com WX3000 Manuel D’Utilisation

 

2-11 

Follow these steps to configure a static multicast group member port in Ethernet port view: 

Enter system view 

system-view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Configure the current port as a 
static member port for a 
multicast group in a VLAN 

multicast static-group 
group-address vlan vlan-id 

Required 

By default, no port is configured 
as a static multicast group 
member port.  

 

Follow these steps to configure a static multicast group member port in VLAN interface view: 

Enter system view 

system-view 

— 

Enter VLAN interface view 

interface vlan-interface 
interface-number 

— 

Configure specified port(s) as 
static member port(s) of a 
multicast group in the VLAN  

multicast static-group 
group-address interface 
interface-list 

Required 

By default, no port is configured 
as a static multicast group 
member port. 

 

In a network where the topology is unlikely to change, you can configure a port on the device as a static 

router port, so that the device has a static connection to a multicast router and receives IGMP 

messages from that router.  

Follow these steps to configure a static router port in Ethernet port view: 

Enter system view 

system-view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Configure the current port as a 
static router port 

multicast static-router-port 
vlan vlan-id 

Required 

By default, no static router port 
is configured.